software CUBUS | nodongle.biz solutions

Aug 2022 – Jan 2023 Compatibility list

Posted on February 1, 2023 by Member Posted in news

3DesignCAD V11.001 by Type3 is the most innovative 3D Jewelry CAD software solution on the market and is aimed to jewelry creators and manufacturers, watchmakers, accessory designers or artisan jewelers. Tested with the HASP SRM key emulator with custom license (all options are activated, including 3SHAPER and DEEPIMAGE V2.1 and V3).
AMRETAIN by Terrasol is a software based on the K-Rea software. AMRETAIN using for checking single or double retaining walls made of ArcelorMittal, sheet piles. Tested with HASP SRM key emulator.
Blue Vision AutomationSuite by MTU Friedrichshafen GmbH is an automation system for propulsion plants in yachts and workboats with mtu Series 2000 or 4000 engines. Allow remote control for propulsion systems with as many as six drive shafts, and either fixed or adjustable pitch propellers, or even waterjets. From one to six helm stations can be plug and play connected, sending and receiving vital information via CAN data bus connections.Vital system diesel motor information displays on hi resolution, flat screen monitors in vivid graphics and text.. Tested with custom license.
CadnaA 2023 MR1 by Datakustik is the powerful software for calculating and assessing interior noise. Tested with the Sentinel HASP key emulator. Custom license with all activated options is available be request.
CADWIND by MATERIAL Innovative GmbH is the world’s most sophisticated filament winding software. Tested with the WIBU CodeMeter dongle emulator.
Conval 11.4.1.1083 by F.I.R.S.T. is instrumentation, automation & process engineering software for engineers, planners and operators of industrial plants. Tested with the Sentinel HL key emulator. All modules are activated in a custom license.
CUBUS 9 release 22.1 (7) by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. Modules AVENA-9, CEDRUS-9, FAGUS-9, LARIX-9, MURUS-9, PYRUS-9, STATIK-9 with all modules and options are available with the custom license.
DCDesk 6.1.42 Level 7 by Heinzmann is a software for engines and turbines management. Level 7 with all hardware and software versions is supported. Tested with the Hardlock key emulator.
Digifort 7.4 is a surveillance and recording software for closed-circuit TV based on TCP/IP nets with the ability to control and view images of IP or analog cameras. Tested with the UNIKEY dongle emulator.
ETAP 22.0.2by Operation Technology Inc. is a full spectrum analytical engineering software specializing in the analysis, simulation, monitoring, control, optimization, and automation of electrical power systems. ETAP 20 software offers the best and most comprehensive suite of integrated power system enterprise solution that spans from modeling to operation. Tested with the HASP SRM key emulator. Custom license with all modules activated is available.
FOXTA V4 by Terrasol is s a software suite dedicated to foundation design. Tested with HASP SRM key emulator.
FrameCAD Detailer 5.1.9.0 is a totally versatile detailing package with world-leading detailing flexibility, makes the process of engineering, designing and detailing each project fast, simple and highly accurate. Tested with the HASP SRM key emulator. Perpetual license is possible.
FrameCAD Revlink 2023 is a plugin, allows to work seamlessly between Revit and FRAMECAD Detailer, or Revit and FRAMECAD Structure. Tested with HASP SRM key emulator.
FrameCAD Structure 9.2.5.15 is a comprehensive and powerful detailing and design software package with advanced computer-aided engineering capability. It makes real time engineering calculations as the designs are created, analysing loads, deflections and other forces, making it an easy process to check for compliant engineering. Tested with HASP SRM key emulator.
FRILO 2023.1 by Nemetschek is a software for structural analysis and structural design. Tested with the custom license with all acttivated features and options.
Gradework 4D 1.08 by Agtek is a software optimized for construction operations, Gradework 4D adapts AGTEK’s familiar estimating interface for use in planning work, modeling grade, and measuring progress. Tested with the HASP SRM key emulator.
GTK Cut II by Grafitroniks is a cutting software. Tested with the HASP key emulator.
Helium Polish 5.6.91 CPD by OctoNus is a special software for diamond scanner for use in cutting factories, laboratories and dealers. Tested with HASP SRM key emulator.
Helium Rough 6.0.53 CPD and H47 by OctoNus is the most accurate advanced rough cavity mapping and inclusion scanning, value based planning equipment, optimizing rough with value analysis and sawing plans. Tested with HASP SRM key emulator.
HYPACK 2022 Q3 is a software for Hydrographic Data Collection, Processing and Final Products. It has everything you need to design your survey, collect your single beam data, process it and generate final products, such as contours, plotting sheets, output for CAD, fly-through views, cross sections and volumes calculations. The sidescan sonar, subbottom, adcp and magnetometer collection and processing modules. HYSWEEP® module for multibeam data collection and processing is available. Tested with the UNIKEY key emulator.
K-Réa v4 by Terrasol checks the design of retaining walls using the subgrade reaction method: diaphragm walls, sheetpile walls, soldier pile walls, etc. Tested with HASP SRM key emulator.
Nanocad 22 is a modern computer-aided design (CAD) platform that provides designers with powerful capabilities in 2D drafting and 3D modeling. Tested with the WIBU dongle emulator.
NUMROTOplus 4.2 is a comprehensive software package for producing and resharpening a whole range of tools. Tested with the HASP SRM key emulator with custom license. Support for the tools all types are unlocked.
OmniWin 2022 Professional by MesserSoft GmbH is a simple, clear and fast designing and nesting software, which adapts intelligently to your machine and your cutting needs. It takes over all cutting tasks for order-based production with CNC thermal cutting machines. Tested with the Sentinel HL dongle emulator. Following options are activated: Bevel, Unfold, BoilerEnd, Tube, Drill, Mill, STEP.
Optocat by Aicon is a software platform to facilitate 3D measuring processes, turning the high-quality measurement information provided by the hardware into highly precise digital mesh data. Tested with the HASP key emulator.
PCAD by Altium is a tool for design PCB. Tested with the HASP key emulator.
PowerFactory 2022 SP2 by DigiSILENT is a power system analysis software application for use in analysing generation, transmission, distribution and industrial systems. Tested with the WIBU CodeMeter dongle emulator with the all options activated license.
Prep Center 3.4.13 by Grafitroniks combines any quantity and variety of PDFs and graphics into fully laid out ready-to-print files and interfaces with Zünd Cut Center and GTK Cut, for a refined end-to-end printing & cutting workflow. Tested with the HASP key emulator.
ProMax 6.0 by Bryan Research & Engineering is a powerful and versatile process simulation software package that is used by engineers worldwide to design and optimize gas processing, refining and chemical facilities. Tested with the Sentinel HL key emulator.
RadExpo 2019 is a seismic processing software on Windows. It is capable for seismic processing from real-time seismic acquisition QC and in-field processing to final stacks. RadExPro can also be used for complete near–surface land seismic data processing — reflection, refraction, and MASW. Tested with the Sentinel HASP key emulator.
RS2 by Rocscience is a program for 2D finite element analysis of geotechnical structures for civil and mining applications. Applicable for both rock and soil (RS2 = Rock and Soil 2-dimensional analysis program), RS2 is a general purpose finite element analysis program for tunnel and support design, underground excavations, surface excavation, slope stability, embankments, dynamic analysis, foundations, consolidation, groundwater seepage and more. Tested with the HASP SRM key emulator.
RS3 by Rocscience is a 3D program for the analysis of geotechnical structures for civil and mining applications. Applicable for both rock and soil (RS3 = Rock and Soil 3-dimensional analysis program), RS3 is a general purpose finite element analysis program for underground excavations, tunnel and support design, surface excavation, foundation design, embankments, consolidation, groundwater seepage and more. Tested with the HASP SRM key emulator.
SAPRO 5.7 by Siemens Building Technologies is Programming tools for Climatix. Climatix is a complete solution that uses the latest, most innovative technologies to enable cost-effective and efficient control of HVAC equipment.
SCAGE V2 by Terrasol is a software package dedicated to the structural analysis of geotechnical structures. Tested with HASP SRM key emulator.
SES CDEGS 17.1 by Safe Engineering Services & technologies is Integrated Software for Power System Grounding/Earthing, Electromagnetic Fields and Electromagnetic Interference. Tested with the HASP SRM key emulator with custom license. The solution support engineering programs: RESAP, FCDIST, MALT, MALZ, TRALIN, SPLITS, HIFREQ, FFTSES. Following modules are included: AutoGridPro, AutoGroundDesign, Right-Of-Way Pro, SESTLC Pro, SESEnviroPlus, SESShield-2D, SESShield-3D, SESImpendance, CorrCAD.
SICAM PAS 9.0 by SIEMENS is a software for configure and operate various types of protection units, IEDs, bay control units, measured-value recorders and telecontrol units from a wide range of manufacturers. SICAM PAS offers a large number of commercially available communication protocols for recording data from various devices and through differing communication channels. Tested with the HASP SRM key emulator.
SLAKE by Terrasol is a software dedicated to the analysis of the liquefaction hazard of soils subjected to seismic stresses, from the exploitation of in situ tests. Tested with HASP SRM key emulator.
Slide2 by Rocscience is a 2D slope stability program for evaluating the safety factor or probability of failure, of circular or non-circular failure surfaces in soil or rock slopes. Tested with the HASP SRM key emulator.
Slide3 by Rocscience is designed to be as straightforward as possible to use for a fully 3D numerical analysis program. The most complex aspect of modelling is Geometry creation and editing. Most other features are quick to learn and interpret. Tested with the HASP SRM key emulator.
Socet GXP 4.5 Pro by BAE Systems is an advanced geospatial intelligence software solution that utilizes imagery from satellite and aerial sources to identify, analyze, and extract ground features, allowing for rapid product creation. Image analysis, advanced photogrammetric techniques, remote sensing, and feature collection workflows are seamlessly combined into one streamlined package. Tested with the Sentinel key emulator.
SOFiSTiK 2023 by is a full-cycle structural engineering software. With SOFiCAD and SOFiPLUS-x modules. Tested with the WIBU CodeMeter hardware key emulator.
SoundPLAN noise 9.0 is noise modeling software. With SoundPLANnoise, it is easy to create quick noise simulations, a variety of tabular outputs and informative noise maps. It also supports the assessment of different evaluation methods. Tested with the Hardlock and Sentinel HL key dongle emulator. Custom license with all activated modules and perperual date is available.
Staubli Studio Robotics 2023 is a software suite for robotics application development and maintenance. Tested with the HASP SRM key emulator.
STRATICAD V3 by Terrasol is Geotechnics and CAD software. Tested with HASP SRM key emulator.
TALREN V6 by Terrasol is ideal for checking the stability of geotechnical structures, with or without reinforcements: natural slopes, cut or fill slopes, earth dams or dikes. It takes into account various types of reinforcements such as: anchors and soil nails, piles and micropiles, geotextiles and geogrids, steel and polymer strips. Tested with HASP SRM key emulator.
TopSolid 2022 by TOPSOLID is the only integrated CAD/CAM software package specially developed to meet the needs of the wood industry. Contains modules TopWood Pro, ExPlanner, Ardis Interface, Tested with the Sentinel SuperPro dongle emulator.
TRIBON M3 by AVEVA is ship design integrated software, which proved to be the best and most complete solution for its current and future shipbuilding requirements. Tested with the Sentinel HL dongle emulator.
Xelis Dental 1.6 and 2.0 by INFINITT is a dental implant simulation software for dentists and implantologists. It provides very useful functions such as Implant Simulation, Sinus Volume Measurement, Canal Draw and evalutation of bone density. Tested with the HASP SRM key emulator.

August – December 2021: Software compatibility list

Posted on January 3, 2022 by Member Posted in news

3DesignCAD V10.200 by Type3 is the most innovative 3D Jewelry CAD software solution on the market and is aimed to jewelry creators and manufacturers, watchmakers, accessory designers or artisan jewelers. Tested with the HASP SRM key emulator with custom license (all options are available, including 3SHAPER and DEEPIMAGE V3).
Advisor 7.601 by Sarin is the world’s most widely used for diamond rough planning software. Tested with the Sentinel HASP key emulator.
AM-PRO 2.0 by V-Soft Communications is AM Mapping and Frequency Search Program. Tested with the HASP HL key emulator.
CadnaA 2021 MR2 by Datakustik. CadnaA (Computer Aided Noise Abatement) is the leading software for the calculation, presentation, assessment and prediction of environmental noise. Tested with the Sentinel HASP key emulator. All modules and options can be activated by request.
Conval 11.2.0.1044 by F.I.R.S.T. is a software for engineers, planners and operators of industrial plants, provides extensive calculation functionalities for components and processes in industrial systems, based on tried-and-tested methods, such as DIN, VDI, VDMA EN/ISO and ISA. Tested with the Sentinel HL key emulator.
CUBUS 8 release 21.1.1 by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. Modules AVENA, CEDRUS, FAGUS, LARIX, MURUS, PYRUS, STATIK with all options are available with the custom license.
DiamCalc 3.3.53.724 by OctoNus is a system for cut gemstones modeling, creating real (photorealistic) image of a polished diamond. Tested with the Sentinel HASP SRM dongle emulator.
DiamCalc 3.4.19.791 by OctoNus is an advanced analytic program for evaluating diamond cut quality and light performance. Tested with the Sentinel HASP SRM dongle emulator.
DIASYS 2.73 by MTU Friedrichshafen GmbH is a diagnostic software used to communicate with various MTU controllers, RCS-5 Remote Control Systems, MCS-5 Monitoring and Control Systems, ECU-9 and EXU units, XCP protocol, Dialog SafeDEC controller. Tested with the Hardlock dongle emulator. Custom license with the Service Level 2 and all ECUs type supported is available by request.
ETAP 21.0.1 by Operation Technology is a full spectrum analytical engineering software specializing in the analysis, simulation, monitoring, control, optimization, and automation of electrical power systems. ETAP 20 software offers the best and most comprehensive suite of integrated power system enterprise solution that spans from modeling to operation. Tested with the HASP SRM key emulator. Custom license with all modules activated is available.
EverCCD by Wuhan Everccd technology is a software for large vision laser cutter system. Tested with the SuperDog (China version of the HASP SRM) key emulator.
FrameCAD Detailer 5.1.1.41 is a totally versatile detailing package with world-leading detailing flexibility, makes the process of engineering, designing and detailing each project fast, simple and highly accurate. Tested with the HASP SRM key emulator. Perpetual license is possible.
FrameCAD Revlink 2021 1.5.2.0 is a plugin, allows to work seamlessly between Revit and FRAMECAD Detailer, or Revit and FRAMECAD Structure. Tested with HASP SRM key emulator.
FrameCAD Structure 9.2.4.4 is a comprehensive and powerful detailing and design software package with advanced computer-aided engineering capability. It makes real time engineering calculations as the designs are created, analysing loads, deflections and other forces, making it an easy process to check for compliant engineering. Tested with HASP SRM key emulator.
FRILO release 2022-1 is one of the leading providers of innovative calculation programs for structural analysis and design. Therefore, you can access a wide range of modern solutions from the four superordinate areas of Reinforced Concrete, Roof & Timber, Foundation & Soil Analysis and Steel. Tested with the full features custom generated license.
GE Masoneilan Smarts Assistant 3.10.0.12 by GE is a SVI2 Firmware download and utility program. Tested with the custom license. Professional and Internal Debug level license is available.
GET3D 5.0 by Daspatial is a light-weight 3D Cloud Modeling Software integrated with AI technology, realizing data uploading, cloud modeling, 3D visulization, etc.. Tested with the Sentinel HASP key emulator.
GPS.opt 7.62 by LiSEC is a glass cutting optimization software. Tested with the Eutron Smartkey key emulator.
HYPACK 2021 Q3 is a software for Hydrographic Data Collection, Processing and Final Products. It has everything you need to design your survey, collect your single beam data, process it and generate final products, such as contours, plotting sheets, output for CAD, fly-through views, cross sections and volumes calculations. The sidescan sonar, subbottom, adcp and magnetometer collection and processing modules. HYSWEEP® module for multibeam data collection and processing is available. Tested with the UNIKEY key emulator.
Linea 32, SmartOffice, Crono, ManutenzioneEnti by S.T.R S.p.A. is a software for business and order management of a work. Safety and quality control plans. Tested with the Eutron Smartkey 3 key emulator.
LiNear Desktop 22, Analyse, Design 3D, Building, CADinside is the Professional Engineering Software for HVAC, Plumbing and Plant Design. Tested with the HASP SRM key emulator. Custom license with all modules and options is available.
Masoneilan ValVue 3.60.3 by Baker Hughes is a software provides high performance digital process control and safety that facilitates smooth set-up and ongoing asset management. It is compatible with existing analog systems, on-line diagnostics, partial stroke testing and improved process yield. Tested with the custom license with activated Internal Debug level, features: Device Status Monitoring, HART, FF, Advanced DTM Feature support, Audit Trail, Sequencer and all firmware types: DLT, DLTSENSOR, ESD, SVi1000, SVI2AP, SVI3.
ModelFun 3.0 by Daspatial is a module for GET3D Cloud Modeling Software. Tested with the Sentinel HASP key emulator.
ModelPainter 4.0 by Daspatial is a module for GET3D Cloud Modeling Software. Tested with the Sentinel HASP key emulator.
Predictor-LimA versions 2021 and 2022 SoftNoise. is the complete solution for all environmental noise projects. It bundles the intuitive Predictor GUI and flexible LimA GUI in one powerful package that provides the best solution for whichever project you have, from small-scale industrial situations to large-scale city noise mapping. Noise predictions for industry, roads, railways, aircraft and wind turbines are all supported. The software is used by acoustic consultants, environmental authorities, heavy industries and educational institutes. Tested with the Sentinel HASP key emulator.
PROCON V2.500 is a software for control some equipment. Tested with the Hardlock SE key emulator.
PROMOTIC 8 by MICROSYS is a complex SCADA object software tool for creating applications that monitor, control and display technological processes in various industrial areas. Tested with the Sentinel HASP key emulator.
RXCALC V2.500 is a software for lens modelling. Tested with the Hardlock key emulator.
SAPRO Climatix Tools 9.50 is a Graphical, object-oriented programming tools as per IEC 61131-3 (FBD, SFC, ST) Archive and version management, workgroup, workflow support and library management HVAC libraries for refrigeration, air conditioning and district heating. Tested with the Hardlock key emulator.
SEMA 22.1 build 10400 by SEMA GmbH is software for timber construction and stair design as well as for sheet metal work. Tested with the Sentinel HL key emulator. Custom license with all activated options and features is available by request.
Smarts Assistant 3.23.0.1 by Baker Hughes is a software for control some equipment. Tested with the custom license. Professional and Internal Debug level license is available.
SRVSpeQ 3.11.3 by DRESSER is a size, select and generate proposal documentation for Consolidated safety relief valves. Tested with the custom license.
STRAP (STRuctural Analysis Program) by ATIR is a optimized software solutions for structural analysis and design. Covering the entire design process from analysis to the production of drawings, STRAP offers the design engineer versatile solutions for a wide range of concrete and steel structures including residential/commercial buildings, bridges, industrial facilities, retaining tanks, towers, and many more.. Tested with the Sentinel HL key emulator.
TruTops Boost with TecZone Bend by TRUMPF provides support for your processes with the full extent of TRUMPF’s bending expertise. You can use the software to create bending programs intuitively for automated bending cells. A particularly practical benefit is that with TruTops Bend, you do not program your bending cells on the machine, but instead offline – i.e. at a work station, parallel to production. This significantly reduces non-productive time and therefore increases your machine availability. Tested with the Sentinel HASP key emulator. All options and features can be activated: BOOST, CELL, TUBE, WELD, etc.
UFED Physical Analyzer 7.49 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
UFED4PC 7.49 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Gemalto HL (Sentinel HASP) key emulatorwith full featured custom license.
ValSpeQ 3.88.0 and 4.17.3 by Baker Hughes is a full function, Windows based multi-configurator for Control Valve, Level, Accessory and Regulator sizing, selection and specification tool. Tested with the custom license. Professional option is available.
WinCAM and MCAD by Teyvent is a CAM software for operate some plasma equipment. Tested with the HASP key emulator.
WinElso 8 is a software for design of power supply and electric lighting systems. Tested with the HASP key emulator.

March-July 2021: Software compatibility list

Posted on August 2, 2021 by Member Posted in news

3DesignCAD V10.1 by Type3 is the most innovative 3D Jewelry CAD software solution on the market and is aimed to jewelry creators and manufacturers, watchmakers, accessory designers or artisan jewelers. Tested with the Sentinel HASP HL key emulator with custom license (all options is available, including 3SHAPER and DEEPIMAGE V3).
BioWin 6.2 by EnviroSim is a wastewater treatment process simulator that ties together biological, chemical, and physical process models. BioWin is used world-wide to design, upgrade, and optimize wastewater treatment plants of all types. Tested with the Hardlock key emulator. PetWin and BW Controller options are available by request.
CadnaA 2021 by Datakustik is the powerful software for calculating and assessing interior noise. Tested with the Sentinel HASP key emulator. Custom license with all activated options is available be request.
CHARON VAX, AlphaServer, PDP, PA-RISC, SSP, TB, TITAN VM/XP by Stromasys is software for server emulation for PDP-11, VAX, Alpha, PA-RISC, and SPARC systems. It creates an emulation layer between the Intel platform and a customer’s legacy OS and applications. It runs OpenVMS and Tru64 operating systems, layered products, and applications in their original binary form. Tested with Sentinel HL key emulator and custom license with all acivated options.
CIMCET – Real-Time PID Tuning Training and Simulation Software with Certification and Testing Module. Tested with custom license.
CimPACK 19.0 and 20.0 SP1 by Cimex is CAD Design and Machining software for packaging and manufacturing professionals. Tested with the Sentinel HL dongle emulator.
Conval 11.1.0.1034 by F.I.R.S.T. is a software for engineers, planners and operators of industrial plants, provides extensive calculation functionalities for components and processes in industrial systems, based on tried-and-tested methods, such as DIN, VDI, VDMA EN/ISO and ISA. Tested with the Sentinel HL key emulator.
Cube-manager by STONEX is a software for managing data from GNSS receivers and Total Stations, it is composed of 3 main modules (P, T, M), each one specialized in a series of functions. Among the functions shared by all the modules, you can have plano-altimetric elaborations, generate 3D models and calculate contour lines. Tested with the custom generated license.
CUBUS 8 release 21.1 by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. Modules AVENA, CEDRUS, FAGUS, LARIX, MURUS, PYRUS, STATIK with all options are available with the custom license.
DeltaV 14.3 by EMERSON is easy and flexible modern automation systems that eliminate operational complexity and minimize project risk. Tested with the Hardlock key emulator. The license expiration date can be changed.
EliCAD, EliKUT by Elitron is the CAD design system number one on the market for ease of use and completeness. Entirely developed by Elitron, is characterized by functional, simple, original and extremely intuitive solutions, resulting from the direct knowledge of the footwear industry and years of experience in CAD. ElitronCAD 2D Footwear is an open system, which can be interfaced with any other CAM system. Tested with the Eutron Smartkey dongle emulator. Custom license with all activated options is available.
ETAP 20.6.1 by Operation Technology is a full spectrum analytical engineering software specializing in the analysis, simulation, monitoring, control, optimization, and automation of electrical power systems. ETAP 20 software offers the best and most comprehensive suite of integrated power system enterprise solution that spans from modeling to operation. Tested with the HASP SRM key emulator. Custom license with all modules activated is available.
eXLerate by Spirit is software platform made for automation of oil and gas measurement. eXLerate is made and used for the automation of oil and gas measurement systems, such as custody transfer metering stations, calibration facilities, crude gathering stations, FPSO’s and tank depots. Tested with the Sentinel HL key emulator.
OneCNC XR4 and OneCNC XR7 is a software for creating a framework, known as ‘trak’, that is manufactured from a unique blend of polymers and fire-retardant additives tested to virtually no VOC emissions. Tested with the Sentinel SuperPro key emulator.
INFINITY FANCY SHAPE is a software for diamond laser measurement. Tested with the Sentinel HL key emulator.
FrameCAD Detailer 5.0.1.43 is a totally versatile detailing package with world-leading detailing flexibility, makes the process of engineering, designing and detailing each project fast, simple and highly accurate. Tested with the HASP SRM key emulator. Perpetual license is possible.
FrameCAD Structure 9.2.3.18 is a comprehensive and powerful detailing and design software package with advanced computer-aided engineering capability. It makes real time engineering calculations as the designs are created, analysing loads, deflections and other forces, making it an easy process to check for compliant engineering. Tested with HASP SRM key emulator.
GE Proficy Cimplicity by General Electric Company. is a client/server-based visualization and control solution that collects real-time and historical data from different plant systems, and provides the right information anytime and anywhere to better monitor and control processes, equipment and resources. Tested with the HASP key emulator.
Fleet Head Office System by Orpak is a centralized fleet management and authorization server for all fleet-oriented activity in a region. Tested with the HASP SRM key emulator.
IGSS32 by Schneider Electric is full featured automation software – a SCADA system for process control and supervision. Tested with the Hardlock key emulator.
Archimede by Kosmosoft is a CRM, CAD, CAM software to design windows, doors, shutters, blinds. Tested with the Micropi CPUSB dongle emulator.
MicroScada by ABB FISUB is designed for complete functionality for real-time monitoring and control of primary and secondary equipment in transmission band distribution substations. It allows you to easily and safely interact with protection and control intelligent electronic devices (IEDs), as well as with the process via the operator’s workplace. In this way, it effectively promotes taking the right actions and achieving maximized availability of your power system. Tested with the HASP HL key emulator.
NWWin2 by Spectra s.r.l. is a software for noise and vibration measurements. Tested with the Keylok II key emulator. All modules and options can be activated in the custom license.
OnColor by CyberChrome. It is profiler’s software with unique profiling method ensures accuracy and consistency of data regardless of the make or model of spectrophotometer. When using Profiler, the resulting measurements can easily be shared across departments, divisions and companies with confidence. Tested with the Hardlock key emulator.
OneCNC XR4 and OneCNC XR7 by QARM is a CAM system for NC part programming. With unparalleled ease of use and sophisticated toolpath generation, it’s the only CAM system you’ll need for milling, turning and mill-turn machining, Wire EDM, Laser, Plasma, Router or Flame Cutting machines. Tested with the Hardlock key emulator.
PITOPS – PID Tuning Simulation, Optimization, Closed-Loop System Identification and APC Design (Advanced Process Control). It is a software product for identifying process dynamics (transfer function parameters) using plant data. Tested with custom license.
PowerFactory 2021 SP4 by DigiSILENT is a power system analysis software application for use in analysing generation, transmission, distribution and industrial systems. Tested with the WIBU CodeMeter dongle emulator with the full featured license.
SCIA Engineer 21.x by Nemetschek is a design and multi-material structural analysis software. Tested with the custom solution.
SEMA 21.2 build 12000 by SEMA GmbH is software for timber construction and stair design as well as for sheet metal work. Tested with the Sentinel HL key emulator. Custom license with all activated options and features is available by request.
SoundPLAN Essential 5.1 by SoundPLAN GmbH is a the market leader for noise modeling software. Tested with the Hardlock and Sentinel HL key dongle emulator. Custom license with all activated options is available.
SpectraPro is software for printers calibrating. Tested with the Sentinel HL key emulator.
Tracer TU by Trane is a service tool for Chillers and Programmable Controllers. Tested with the custom license.
UFED Physical Analyzer 7.47 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
UFED4PC 7.45.1.43 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Gemalto HL (Sentinel HASP) key emulatorwith full featured custom license.
UltraMap 5.0 by Vexel Imaging is the all-in-one photogrammetric processing software for rapid generation of point clouds, DSMs, DTMs, ortho imagery and 3D textured TINS from UltraCam aerial imagery. Tested with the Sentinel HL key emulator.
VXvue with PureImpact option is an image viewer program with specialized modules to acquire, adjust, and manage diagnostic images created by the VIVIX-S Series. Tested with custom license.
Winacas WIN750 by Honeywell is a software application used for communicating with the N-750 security system (panel). This software provides complete system management of access control and security functions with on-site and off-site administration of the N-750 security system. Tested with the Hardlock key emulator.
Wincut by SCM group is a software used to control the operations of a panel saw and has the following main functions. Tested with the Hardlock key emulator.

June 2020: Software compatibility list

Posted on July 1, 2020 by Member Posted in news

Cubus 8 release 20.1 by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. Modules AVENA, CEDRUS, FAGUS, LARIX, MURUS, PYRUS, STATIK with all their features are available with the custom license.
DCDesk 2000 version 6.0.154 by Heinzmann is a software for engines and turbines management. Level 7 with all hardware and software versions is supported. Tested with the Hardlock key emulator.
Dimensions! 6.1 by PROCAM is all-in-one solution for footwear development, 3D design, processing and data management. The CAD data and information contained within DIMENSIONS! are the basis for all further enterprise processes, such as cost calculation, material allocation, cutting, product data managment, production planning, etc. Tested with the HASP SRM key emulator with custom license.
ETAP 20 by Operation Technology is a full spectrum analytical engineering software specializing in the analysis, simulation, monitoring, control, optimization, and automation of electrical power systems. ETAP 20 software offers the best and most comprehensive suite of integrated power system enterprise solution that spans from modeling to operation. Tested with the HASP SRM key emulator. Custom license with all modules activated is available.
InVivo Dental 6.0.5 by Anatomage is clinical application for Implantology, CAD/CAM, Orthodontics, Oral Surgery, Periodontics, Prosthodontics, Radiology, Medicine and General Science. Custom license is possible for all modules: AnatoCeph, 3D-Analysis, Medical Design Studio, Passage, Stitch.
MILLBOX 2020 by CIMsystem is the dental application based on SUM3D platform. This tool has been developed to meet the specific needs of dental technicians who were asking for an easy to use and flexible, ensuring high performance in a short time. Tested with the Eutron Smartkey key emulator with custom license.
SES CDEGS Software Package 16.2 by Safe Engineering Services & technologies is Integrated Software for Power System Grounding/Earthing, Electromagnetic Fields and Electromagnetic Interference. Tested with the HASP SRM key emulator with custom license. The solution support engineering programs: RESAP, FCDIST, MALT, MALZ, TRALIN, SPLITS, HIFREQ, FFTSES. Following packages are included: AutoGridPro, AutoGroundDesign, Right-Of-Way Pro, SESTLC Pro, SESEnviroPlus, SESShield, SESImpendance, CorrCAD.
SUM3D 2020 by CIMsystem is the dental application for dental technicians who were asking for an easy to use and flexible, ensuring high performance in a short time. Tested with the Eutron Smartkey key emulator with custom license.
TachyCAD by FARO is an AutoCAD application that connects a total station or hand-held laser to mobile computer via cable or Bluetooth. TachyCAD supports most of the tachymeters on the market from all of the major manufacturers. Tested with the WIBU CodeMeter dongle emulator.
Trimble Business Center 5.30 is a powerful surveying application that is the perfect desktop complement to Trimble’s full range of survey solutions. Tested with the Sentinel HASP SRM key emulator. Custom license with all activated modules is possible.
Trutops 300 by TRUMPF is software laser machines. Tested with the Hardlock key emulator with custom generated license.
Trutops Boost 6.0 by TRUMPF is the all-in-one solution for 3D design and the programming of laser, punching, and bending machines. Tested with the HASP SRM key emulator.
UC2 (Universal Converter) by PROCAM is a bidirectional converter software for most file formats commonly used in the leather processing industry. The software can be used as a stand alone product for file conversion and comparison or be installed as a component within other software-products from Procam. Tested with the HASP SRM key emulator with custom license.
UFED4PC 7.34 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Gemalto HL (Sentinel HASP) key emulator with full featured custom license.

December 2019 – February 2020: Software compatibility list

Posted on February 29, 2020 by Member Posted in news

Bailine BSP is a DOS based software for medical equipment. Tested with the HASP4 key emulator.
Cubus 8 release 19.4.2 by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. Modules AVENA, CEDRUS, FAGUS, LARIX, MURUS, PYRUS, STATIK and all their options are available with the custom license.
DIASYS 2.72 by MTU Friedrichshafen GmbH is a diagnostic software used to communicate with various MTU controllers, RCS-5 Remote Control Systems, MCS-5 Monitoring and Control Systems, ECU-9 and EXU units, XCP protocol, Dialog SafeDEC controller. Tested with the Hardlock dongle emulator. Custom license with Level 2 and with supporting all ECU types is available.
EasyStone 6.4l1 with POWERSIM by DDX Group is is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres. EasySTONE is complete and fully manages the stone processing avoiding purchase, maintenance, training costs for other additional products: from design to disposition of pieces and underpieces on the bench, 3D automatic collision detection with simulation, machining optimization and program generation. POWERSIM is an additional module capable to verify the NC part programs directly on the PC. Tested with HASP SRM key emulator and with full featured custom license.
iMos CAD/CAM 13.0, 14.0 is interior design software. Tested with the HASP key emulator. All modules with custom license are available.
MPAS by Xi’an Sitan Instruments is a software for analyze data from hole loggin tools equipment. Tested with the SuperDog key (based on Sentinel HASP key) emulator.
Oxygen Immersion 5.5.4 by by OctoNus is designed for diamond cutters and sale specialists dealing with rough diamonds, manufacturers and technologists. Tested with Sentinel HASP SRM key emulator.
DIMENSIONS! 6.1 by PROCAM is a sofwtare for footwear development. Main features: Pattern Engineering System (CAD), Full 2D and 3D CAD integration, 2D technical tool (engineering, grading, etc.), 3D virtual design tool (communication tool), Ray Tracing. Tested with the Sentinel HASP key emulator.
RWIND Simulation version 1.21 by PC-PROGRESS is a stand-alone program for numerical simulations of wind flow (digital wind tunnel) around buildings or any other objects and generating wind loads, i.e. forces acting on these objects. Tested with the Sentinel HL key emulator.
SEMA 19.2 and 20.1 by SEMA GmbH is software for timber construction and stair design as well as for sheet metal work. Tested with the HASP SRM key emulator. Custom license with all modules activated is available.
WeldSight by Olympus IMS is software helps deliver compliant, repeatable phased array and UT-TOFD weld inspections. Tested with the Sentinel HASP key emulator.
DCDesk 2000 version 6.0.140.0 is a software for configuration, parameterization and programming of turbines and engines digital ECUs are supported. Tested with the Sentinel HL dongle emulator. License with Level 7 with support EMR2, Liebherr MVC03 and DC5 ECUs is available.
GEO-INFO MAPA 19.4.5 by Systherm is the main module of an integrated Geographic Information System GEO-INFO. Tested with the HASP SRM key emulator.
Geos 9 by ZEIA is a geodesic CAD software. Tested with the Eutron Smartkey 3 dongle emulator.
HYPACK versions 2019 SP3 and 2020 is a necessary software to complete hydrographic, side scan and magnetometer survey requirements. Tested with the UNIKEY dongle emulator. Custom full featured license is available.
ISTRAM ISPOL 2020 by Buhodra Ingeniería is CAD/CAM software for civil engineering. Tested with the HASP SRM key emulator. Custom license is available.
KLAES 7.12.3.51 and 7.13.1.55 and 7.14.0.40 is software solutions for windows, doors, facades and conservatories. Versions premium, professional, vario, trade and 3D are supported. Tested with the Hardlock key emulator. All options is available with custom license.
LogiKal 11.2 and 12 by ORGADATA is a software package with CAD-Suite 2D and CNC includes all important functions needed in metal construction: From the input of elements to calculation and even optimisation of cuts. Tested with the Sentinel HL key emulator.
TurnMaster 2.0 by Eterno S.r.l. is a software for employee accounting. Tested with the Eutron Smartkey dongle emulator.
UFED Analytics Desktop 8.2.666 by Cellebrite has functionality like UFED Physical Analyzer and UFED Link Analysis. It turn raw, disparate data into actionable intelligence with greater speed and efficiency. Tested with the Sentinel HL key emulator.
UFED Physical Analyzer 7.29.0.152 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
UFED4PC 7.28.2.8 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator with full featured custom license.

April -July 2019: Software compatibility list

Posted on August 6, 2019 by Member Posted in news

3D Endo by Dentsply Sirona is an endodontic treatment planning software. Tested with the WIBU CodeMeter dongle emulator.
Engineering Base 2019 SP1 by Aucotec is engineering software for the life cycle of machines, plants & mobile systems. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
CAD4U by C-TECHNIK Software GmbH is drawing and construction software. Tested with the Hardlock key emulator.
CadnaA 2019 isby Datakustik is the powerful software for calculating and assessing interior noise. Tested with the Sentinel HASP key emulator.
Cubus 8: AVENA-8, CEDRUS-8, FAGUS-8, LARIX-8, MURUS-8, PYRUS-8, STATIK-8 by Cubus AG is a software for structural and geotechnical engineering. Tested with the Hardlock key emulator. All Modules and Options are available with the custom license.
Curry 8 by Compumedics is a Comprehensive Package for EEG Acquisition, Analysis, Image Data Processing, and Source Reconstruction. Tested with the HASP4 key emulator.
EasyCut 4.9n3 by DDX Group is the CAD/CAM software specific for marble, granite, stone and similar materials working industry by numerically controlled BRIDGE SAWS. Tested with the Eutron Smartkey key emulator. All options can be activated in the custom license.
EasyWood 6.6d1 (X-CAD 2019) by DDX Group is woodworking sector CAD/CAM software. EasyWOOD is complete and fully manages the woodworking process: from design to disposition of pieces and underpieces on the bench, 3D automatic collision detection with simulation, machining optimization and program generation. Tested with HASP SRM key emulator with the custom license (Premium level with full options set)
EMTP-RV is a software for simulation and analysis of power systems. Tested with the custom license.
GravoStyle 8 Build 5 by Gravograph is management software for mechanical and laser engraving machines. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
IsoCAM 5.0 Pro by MDA Elektronica is Gerber/HPGL editor with isolation feature. Tested with the Eutron Smartkey 3 key emulator.
MAGNET Tools by Topcon is a surveyors go-to software for data processing. Tested with the custom license.
MILLBOX 2019 by CIMsystem is the dental application based on SUM3D platform. This tool has been developed to meet the specific needs of dental technicians who were asking for an easy to use and flexible, ensuring high performance in a short time. Tested with the Eutron Smartkey key emulator.
neXus 1.6 by Compumedics is a software application which provides a centralized patient database and document management system. Tested with the HASP HL key emulator.
ΡΑΦ 7.1 is Static Design of Buildings software. Tested with the HASP SRM key emulator.
PC-DMIS 2019 R1 SP3 by HEXAGON is the world’s most popular measurement software. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
PowerCAD4 is some CAD software. Tested with the HASP4 key emulator.
SCIA 2019 by Nemetschek is a civil engineering package for structural analysis and design. Tested with the custom license.
Sirona inLab + CAM 2019 by Dentsply Sirona is a dental labs CAD/CAM center. Tested with the WIBU CodeMeter dongle emulator.
Sofistik 2018 is a heavy CAD/FEA. Tested with the WIBU CodeMeter dongle emulator.
SoundPLAN 8.1 by SoundPLAN GmbH is a the market leader for noise modeling software. Tested with the Hardlock dongle emulator. Custom license with all activated options is available.
SUM3D 2019 by CIMsystem is the dental application based on SUM3D platform. This tool has been developed to meet the specific needs of dental technicians who were asking for an easy to use and flexible, ensuring high performance in a short time. Tested with the Eutron Smartkey key emulator.
TECNOMETAL 19 by STEEL&GRAPHICS is a CAD/CAM software. Tested with the Sentinel HASP key emulator.
Titan by Tecnai is a special software for electron tomography. Tested with the HASP HL key emulator. Custom license with all activated modules is available.
UFED Analytics Desktop 8.0.192 by Cellebrite has functionality like UFED Physical Analyzer and UFED Link Analysis. It turn raw, disparate data into actionable intelligence with greater speed and efficiency. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
UFED Physical Analyzer 7.21.1.7 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
UFED4PC 7.21.0.31 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator with full featured custom license.
Viz Libero by vizrt is a sports analysis solution. Tested with the WIBU CodeMeter key emulator.
W-CODE by WaveCOM is a radio signal analyze software. Tested with the WIBU CodeMeter dongle emulator.
Wizcon Supervisor 9.4 by ELUTIONS Europe is SCADA software. Tested with the HASP HL key emulator.

September 2018 – March 2019: Software compatibility list

Posted on April 1, 2019 by Member Posted in news

3DesignCAD V9.500 by Type3 is the most innovative 3D Jewelry CAD software solution on the market and is aimed to jewelry creators and manufacturers, watchmakers, accessory designers or artisan jewelers. Tested with the Sentinel HASP key emulator with custom license (all options is available, including 3SHAPER and DEEPIMAGE V3).
AccessTuner Pro/Race for BMW, Ford, Mazda, Mitsubishi, Nissan, Porsche, Subaru by COBB Tuning is engine tuning software created for enthusiast tuners. Accesstuner allows the user to get into the heart of the OEM ECU and create custom calibrations for vehicles equipped with virtually any performance modification. The end result is a tune that is custom tailored to the vehicle’s unique modifications, producing maximum power gains while maintaining the drive-ability and sophistication inherent in the OEM ECU. Tested with the HASP SRM dongle emulator.
Advanced GEM80 Programmer (AGP) is the latest application in a range of GEM80 programming tools from Advanced Technical Software and has been designed to replace the aging UGP, Gemesys and GPP programming packages. Tested with the HASP SRM key emulator.
AEwin for Sensor Highway III by MISTRAS Group is a program for real-time “simultaneous” Acoustic Emission (AE) feature and waveform processing, display, fast storage, and replay. It is used for true, real-time operation and control with your MISTRAS AE Systems (Express-8, PCI2, SAMOS, SH II, SH III, AE USB Node, and Wireless AE Node). Tested with the Keylok II key emulator.
APM Civil Engineering 16 is CAD/CAE system for civil and industrial building structures. Tested with the HASP SRM key emulator.
ASKO-2D version 5.5 is 2D CAD/CAM systems for the footwear industry, a complete automatic cutting solution on sythetic and natural materials, including a leather digitizing system, interactive and automatic nesting, drivers for many cutting machines and a complete management system. Tested with the HASP SRM key emulator.
BACeye 2.0 is a software for мisualization and analysis of BACnet networks. Tested with the Hardlock key emulator.
BOHR2000 by Ackermann KG is a software using for create layer directories according to DIN 4022/4023. Tested with the HASP SRM key emulator.
CadnaA 2018.1 by Datakustik is the powerful software for calculating and assessing interior noise. Tested with the Sentinel HASP dongle emulator.
CARPET Works by Hydromantis is Preliminary Design & Costing for Wastewater Treatment Plants. Tested with the HASP SRM key emulator.
Centering by Bettonville is an application for Setting Station enables off-line setting and positioning of diamond-made objects for any 2,5D shaping operation (shapes from DXF file, fancy shapes, faceting of anvils, crown or pavilion of gem-diamond shapes, etc.). Tested with the Eutron Smartkey key emulator.
Conval 10.4 by F.I.R.S.T. is a software for engineers, planners and operators of industrial plants, provides extensive calculation functionalities for components and processes in industrial systems, based on tried-and-tested methods, such as DIN, VDI, VDMA EN/ISO and ISA. Tested with the Sentinel HL key emulator.
Cubus 7 release 2018.1 is a most productive software tools for structural engineers. Contains following modules: AVENA-7, CEDRUS-7, DOMUS-7, FAGUS-7, LARIX-7, MURUS-7, PYRUS-7, STATIK-7. Tested with the Hardlock dongle emulator and custom full featured license.
DC-Soil (Bodenmechanik) 2018 by DC-Software GmbH contains the whole package DC-Soil including the program DCLABTEGRA for overview and composition of field and laboratory tests. Tested with the Sentinel HL key emulator.
DC-Foundation (Grundbaustatik) 2018 by DC-Software GmbH contains all programs DC-Foundation. Tested with the Sentinel HL key emulator.
Dairy Comp (DCWIN) by Valley Agricultural is the dairy industry’s most advanced on-farm dairy management software program. Tested with the HASP SRM key emulator.
MountainsMap Premium 7.32 by DigitalSurf is a complete solution for scanning probe microscopy image and data analysis. Tested with the HASP SRM key emulator. All optional modules is available.
DVR Examiner 2.6 by DME forensics is a software solution for the recovery of video and metadata from DVR surveillance systems in a forensically sound manner. This “game changing” software can help save your team time and money when recovering video evidence by recovering data directly from the DVR, bypassing passwords to recover video, including deleted video, from a suspect DVR.. Tested with the Keylok II key emulator.
ETAP 18.1.1 and 19.0 by Operation Technology is a full spectrum analytical engineering software company specializing in the analysis, simulation, monitoring, control, optimization, and automation of electrical power systems. ETAP software offers the best and most comprehensive suite of integrated power system enterprise solution that spans from modeling to operation. Tested with the HASP SRM key emulator. Custom license with full modules set is available.
FrameCAD Detailer 5.0 is a totally versatile detailing package with world-leading detailing flexibility, makes the process of engineering, designing and detailing each project fast, simple and highly accurate. Tested with the Sentinel HASP SRM key emulator. Perpetual license is possible.
FrameCAD Structure 9.0 is a comprehensive and powerful detailing and design software package with advanced computer-aided engineering capability. It makes real time engineering calculations as the designs are created, analysing loads, deflections and other forces, making it an easy process to check for compliant engineering. Tested with Sentinel HASP SRM key emulator.
GEO-INFO MAPA 2018.4 by Systherm is the main module of an integrated Geographic Information System GEO-INFO. Tested with the HASP SRM key emulator.
GPS-X by Hydromantis is a Premium Water & Wastewater Modelling and Simulation Software. Tested with the HASP SRM key emulator.
GRAFIS 12 is a unique software for the design and layout of garments. Tested with the HASP SRM key emulator.
ISTRAM ISPOL 2019 is software for civil engineering. Tested with the Sentinel HL key emulator.
KONE KST Tool 1.10 is a software for tune KONE evevators and escalators. Tested with the Keylok II key emulator.
OnDemand3D Dental Server 1.0.10.7462 by Cybermed is a complete imaging solution used by dentists, researchers, orthodontists and many others. It is a module-based software that allows DICOM data storage and includes tools to help with diagnosis and treatment planning. Tested with the HASP SRM dongle emulator. Custom license with all activated modules is possible.
Oxygen DZ 4.8.5.3 by OctoNus is designed for diamond cutters and sale specialists dealing with rough diamonds, manufacturers and technologists. Tested with Sentinel HASP SRM key emulator.
Oxygen DZ Lite 4.8.7.0 by OctoNus is designed for diamond cutters and sale specialists dealing with rough diamonds, manufacturers and technologists. Tested with Sentinel HASP SRM key emulator.
Predictor-LimA Software Suite Type AU-7810 version 2019.01 by EMS Brüel & Kjær is environmental noise modeling and mapping, modeling, calculating and predicting software. Tested with the HASP SRM key emulator.
SmartClass USC by Radix is a software for classroom management. Tested with the custom license.
RAPT 6.5.18 is a Comprehensive Computer Package for the Analysis and Design of Reinforced and Prestressed Concrete Structures. Tested with the Hardlock and Codemeter dongles emulator.
RebarCAD 2018.1 by CADS is detailing software is easy to use to create and edit accurate reinforcement drawings and bar bending schedules. Tested with the HASP SRM key emulator.
Res3Dinvx64 3.14 Professional by Geotomo is 2D and 3D Geophysical Inversion Software for Resistivity and Induced Polarization data. Tested with the Keylok II key emulator.
SICAM PAS v8.0 by SIEMENS is a software for configure and operate various types of protection units, IEDs, bay control units, measured-value recorders and telecontrol units from a wide range of manufacturers. SICAM PAS offers a large number of commercially available communication protocols for recording data from various devices and through differing communication channels. Tested with the HASP SRM key emulator.
Simu Works by Hydromantis is Virtual Platform for Operator Training & Plant Operation. Tested with the HASP SRM key emulator.
Smooth CAM RS 4.0 by MAZAK is a software for fast programming and simulation of the Mazatrol SmoothX and Mazatrol SmoothG CNC systems in an office using the same operation method as on the shop floor. Tested with the Sentinel HL key emulator.
SPAC Start Impianti Plus 16 by SDProget is the most popular and appreciated CAD Software for the design of civil, industrial and tertiary electrical systems. Tested with the Eutron Smartkey key emulator.
Trimble Business Center 5.00 is a powerful surveying application that is the perfect desktop complement to Trimble’s full range of survey solutions. Tested with the Sentinel HASP SRM key emulator. Custom license with all activated modules is possible.
Toxchem by Hydromantis is Industry Standard for Modelling the Estimation of Air Emissions from WWTP. Tested with the HASP SRM key emulator.
Trimble Access Field Software suite offers surveyors and geospatial professionals a range of specialized field applications designed to make fieldwork easier. With an easy-to-use interface, optimized workflows, and real-time data synchronization, the Trimble Access software suite enables you to accomplish more every day. Tested with the custom license (all activated modules is possible).
UFED4PC 7.16 by Cellebrite provides unmatched access to mobile data and exposes every segment of a device’s memory using advanced logical, file system and physical extractions, in-depth decoding, analysis and reporting features. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
WATPRO by Hydromantis is Disinfection Optimization at Drinking Water Treatment Plants. Tested with the HASP SRM key emulator.
WenDuct by WENDES is a HVAC sheet metal and mechanical estimating software covers all aspects of commercial and industrial sheet metal estimating. Wendes Sheet Metal estimating systems are modular providing the most advanced screen takeoff technology and fastest “real time data base. Tested with the Keylok II key emulator.
WenPipe by WENDES is a estimating software provide fast, accurate takeoff with the most comprehensive and accurate pre-loaded labor man-hours and material pricing available. Tested with the Keylok II key emulator.

May-July 2017: Software compatibility list

Posted on August 2, 2017 by Member Posted in news

Aimsun 8.2 by TSS is traffic modelling software that allows you to model anything from a single bus lane to an entire region. Tested with Sentinel HASP SRM key emulator.
BLADE 5.1 by MF Group is CIM’s response to the ever increasing demand for sophisticated software for small metal plate and dog tag production. Tested with Hardlock key emulator.
Caneco BT 5.7 by OLPI is a software for for the automatic dimensioning and diagramming of low voltage electrical installations, calculations and schematics. Tested with the Eutron SmartKey 3 emulator.
Chromeleon 7 is a chromatography software package for chemical labs. Tested with the WIBU-BOX dongle emulator.
Conval 10.2 by F.I.R.S.T. is a software for engineers, planners and operators of industrial plants, provides extensive calculation functionalities for components and processes in industrial systems, based on tried-and-tested methods, such as DIN, VDI, VDMA EN/ISO and ISA. Tested with the Sentinel HL key emulator.
Cubus 2017 release 2 is a most productive software tools for structural engineers. Contains all modules: AVENA-7, CEDRUS-7, DOMUS-7, FAGUS-7, LARIX-7, MURUS-7, PYRUS-7, STATIK-7. Tested with the Hardlock key emulator and full featured custom license.
DeltaV DCS by EMERSON is easy and flexible modern automation systems that eliminate operational complexity and minimize project risk. Tested with the Hardlock key emulator.
DIASYS 2.71 is a diagnostic software used to communicate with various MTU controllers, RCS-5 Remote Control Systems, MCS-5 Monitoring and Control Systems, ECU-9 and EXU units, XCP protocol, Dialog SafeDEC controller. Tested with the Hardlock dongle emulator with all ECU types and service level 2.
EasyStone 4.6 with POWERSIM by DDX Group is is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres. EasySTONE is complete and fully manages the stone processing avoiding purchase, maintenance, training costs for other additional products: from design to disposition of pieces and underpieces on the bench, 3D automatic collision detection with simulation, machining optimization and program generation. POWERSIM is an additional module capable to verify the NC part programs directly on the PC. Tested with Eutron Smartkey 3 key emulator and custom license with full featured options.
FP Pro V9 by Emmegisoft is a window and door design, calculation and order management software with Facade option. Tested with the Hardlock key emulator.
GEO-INFO MAPA 7.2 by Systherm is the main module of an integrated Geographic Information System GEO-INFO. Tested with the Sentinel HASP key emulator.
GL BLADED 4.7 and 3.85 by Garrad Hassan is software package for Wind Turbine design and certification of onshore and offshore turbines. Tested with the Sentinel HASP SRM dongle emulator.
GPS.opt 7.6 by LiSEC is a glass cutting optimization software. Tested with the Eutron Smartkey dongle emulator.
Helium Rough 6.0 by OctoNus is the most accurate advanced rough cavity mapping and inclusion scanning, value based planning equipment, optimizing rough with value analysis and sawing plans. Tested with Sentinel HASP SRM key emulator.
HELIX delta-T is a ISO 5048, CEMA and Viscoeleastic calculations software package. Tested with custom license.
Hyperdent 8+ is a dental branch of well-known HyperMill CAM software for dental labs. Tested with Wibu CodeMeter stick emulator.
Inpho 8.x is a heavy photogrammetry suite designed to precisely transform aerial images into consistent and accurate point clouds and surface models, orthophoto mosaics and digitized 3D features. Tested with the WIBU CodeMeter dongle emulator.
IQAN Active Studio 4 by Parker delivers easy to use graphical programming where time to market and ease of development is key. It allows users with no programming experience to quickly write applications for the desired functionality of their machine. With graphical interface and predefined building blocks, it is perfect for any machine application in mobile markets. Tested with custom serial number.
Leica Application Suite is a microscopy software for scientific labs. Tested with Wibu CodeMeter hardware key emulator.
LogiKal 11.0 by ORGADATA is a software package with CAD-Suite 2D and CNC includes all important functions needed in metal construction: From the input of elements to calculation and even optimisation of cuts. Tested with the HASP SRM key emulator.
Naxos Footwear Edition 2014 is design software for create the style, make the model, prepare production, automate the project. Tested with the Eutron Smartkey dongle emulator.
OpenCAD by Laserdentium is ExoCAD-based CAD/CAM for modeling dental prostheses. Tested with the UNIKEY dongle emulator.
Pathloss 5.0 is a comprehensive path design tool for radio links operating in the frequency range from 30 MHz to 100 GHz. Tested with custom serial number.
PowerFactory 2017 by DIgSILENT is a high-power lines design and analytics software. Tested with Wibu CodeMeter dongle emulator.
SHIRAZ RIP Server V8 is software for manage and process the different print queues. Any number of printer queues can be configured for the same or different printers connected to the system. Tested with the Sentinel HASP key emulator.
Spirit by Princeton Gamma-Tech (Thermo Scientific) is a microscopy software for scientific labs. Tested with Wibu-BOX key emulator.
Staubli Studio Robotics V9 is a software Suite for robotics application development and maintenance. Tested with the HASP SRM emulator.
Trimble Business Center 3.90 is a powerful surveying application that is the perfect desktop complement to Trimble’s full range of survey solutions. Tested with Sentinel HASP SRM key emulator.
TQS V19.5 by TQS Informática is a CAD system for the project design of reinforced concrete structures, prestressed and masonry. Tested with the HASP SRM key emulator.
VisiMix Different Impellers (DI) by VisiMix Ltd. is a widely used software tool for mathematical modeling of mixing in tanks with a few different impellers on the same shaft. Tested with the Sentinel HASP dongle emulator.
VisiMix Laminar by VisiMix Ltd. is unique software tool for mathematical modeling and technical calculations of mixing in manufacturing and treatment of highly viscous liquid media, such as polymers, paints, coatings, pastes, food products. Tested with the Sentinel HASP dongle emulator.
VisiMix Turbulent by VisiMix Ltd. is a widely used software tool for mathematical modeling of mixing and mixing-dependent processes in low viscosity liquids and multiphase media and for technical calculations of mixing equipment. It provides process parameters necessary for analysis, scaling-up and optimization of mixing tanks and reactors with all types of impellers. Tested with the Sentinel HASP dongle emulator.
WinMark Pro V7 by SYNRAD is CO2 laser marking software for adding serial numbers to plastic devices or marking date codes on bottle caps. Tested with Hardlock key emulator.

February-April 2017: Software compatibility list

Posted on May 3, 2017 by Member Posted in news

AccessTuner Pro GTR, BMW by COBB TUNING PRODUCTS is engine tuning software created for professional tuning shops equipped with a chassis or engine dynamometer. Accesstuner Pro offers powerful OEM ECU tuning capabilities to tune for nearly any engine modification. Tested with the Sentinel HASP dongle emulator.
Burli is a world-class developer of newsroom software tools designed by journalists, for journalists. Tested with the Sentinel HASP dongle emulator.
CadnaR 2.5 by Datakustik is the powerful software for calculating and assessing interior noise. Tested with the Sentinel HASP dongle emulator.
Caldera 11 is a professional raster image processing pipeline. Tested with the custom licenses.
Caneco BT 5.6.1, Caneco HT, Caneco Solar, OfficeElec, Caneco Implantation, Caneco MEP, Caneco DC, Caneco TCC by OLPI is a software for for the automatic dimensioning and diagramming of low voltage electrical installations, calculations and schematics. Tested with the Eutron SmartKey 3 emulator.
HIPS and SIPS 10.2 by CARIS is a comprehensive bathymetric, seafloor imagery and water column data processing software. HIPS and SIPS enables you to process simultaneously multibeam, backscatter, side scan sonar, LiDAR and single beam. Tested with the Sentinel HASP dongle emulator.
Cubus 2017 release 1 is a most productive software tools for structural engineers. Contains following modules: AVENA-7, CEDRUS-7, DOMUS-7, FAGUS-7, LARIX-7, MURUS-7, PYRUS-7, STATIK-7. Tested with the Hardlock dongle emulator and custom full featured license.
Diagnostic Tool DTS 8 Monaco by Softing Automotive Electronics is comprehensive testing software for of diagnostic communication, diagnostic data and diagnostic sequences in the areas of engineering, testing and preparation of manufacturing tests. Tested with the Sentinel HASP dongle emulator.
CAD Design MEP 2017 by EastCoast is Specialized software tools, quality MEP content and unmatched support for the Contractor’s HVAC and Piping design to fabrication workflow. Tested with the Sentinel HASP key emulator.
GEO-INFO MAPA 7.1.6 by Systherm is the main module of an integrated Geographic Information System GEO-INFO. Tested with the Sentinel HASP key emulator.
GOM Professional 2016 is a 3D metrology software. Tested with the WIBU CodeMeter dongle emulator.
HYPACK 2017 is a tools necessary to complete hydrographic, side scan and magnetometer survey requirements. Tested with the UNIKEY dongle emulator with custom full featured license.
Inergetix CoRe 6.1 by Health Navigator is a medicine software. Tested with the Sentinel HASP dongle emulator.
Inpho 8.x is a heavy photogrammetry suite designed to precisely transform aerial images into consistent and accurate point clouds and surface models, orthophoto mosaics and digitized 3D features. Tested with the WIBU CodeMeter dongle emulator.
Leica Application Suite (LAS AF) is a software for Leica microscopes. Support samples photography, analyze, classification etc. Tested with the WIBU CodeMeter dongle emulator.
mbAEC 2017 is a civil engineering CAD/FEM software. Tested with the WIBU-BOX dongle emulator.
MIPSPro MTD by Epidote is software is the industry’s leading package for multi-finger caliper data processing and interpretation and now includes a comprehensive reporting option for pipe thickness measurements. Tested with the Sentinel HASP key emulator.
NeoStampa is a professional textile rip & print software. Tested with the Rockey dongle emulator.
PowerFactory 2017 by Digisilent support design and analyze any kind of radial or meshed 1-, 2-, 3- and 4-wire (combined) AC and DC networks power lines. Tested with the WIBU CodeMeter dongle emulator.
Trimble Business Center HCE 3.80 by Trimble provides users with the capability to efficiently edit, process, and adjust geospatial data and create deliverables with confidence. Tested with the HASP SRM key emulator.
ViDi Suite 2.x is an industrial image analysis software with development kit for programmers. Support feature detection, anomaly detection, image classification etc. Tested with the WIBU CodeMeter dongle emulator.

June-July 2016: Software compatibility list

Posted on August 3, 2016 by Member Posted in news

AFT Impulse 6 is a powerful fluid dynamic simulation tool used to calculate pressure transients in piping systems caused by waterhammer. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
Nemetschek AllPlan is a BIM+ collaborative engineering and architecture CAD. Tested with the WIBU CodeMeter dongle emulator.
MILLBOX – SUM3D is the ultimate solution for dental applications based on SUM3D platform. This tool has been developed to meet the specific needs of dental technicians who were asking for an easy to use and flexible, ensuring high performance in a short time. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
CADSIM Plus Dynamic Process Simulator by Aurel Systems is easy-to-use chemical engineering software which allows the you to draw a process flowsheet while creating a process simulation model. Tested with the HASP key emulator.
Cubus 2016 release 2 is a most productive software tools for structural engineers. Contains following modules: AVENA-7, CEDRUS-7, DOMUS-7, FAGUS-7, LARIX-7, MURUS-7, PYRUS-7, STATIK-7. Tested with the Hardlock dongle emulator and custom license.
Deckman Deckman is one of the best tactical routing software. Tested with the Eutron Smartkey 3 key emulator.
Fraunhofer ExoCAD 2016 is a dentist and dental labs CAD/CAM software package. Tested with the Rockey dongle emulator.
GEO-INFO MAPA V7 is the main module of an integrated Geographic Information System GEO-INFO. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
Trimble Inpho is an photogrammetry and digital modeling suite. Tested with the WIBU CodeMeter hardware key emulator.
InVivo Dental 5.4.5 by Anatomage is the most preferred software for CBCT users, covers all clinical applications such as Implantology, CAD/CAM, Orthodontics, Oral Surgery, Periodontics, Prosthodontics, Radiology, Medicine and General Science. Tested with the custom license codes with modules AnatoCeph, 3D-Analysis, Medical Design Studio, Passage, Stitch.
LEAP 4.60 by LinearX Systems is Loudspeaker Enclosure Analysis Program. Tested with the custom license.
Softwell Maker is a rapid development IDE. Tested with the Sentinel SHK dongle emulator.
Medialon Manager can control any audiovisual equipment. Tested with the Rockey hardware key emulator.
NEMO Outdoor 7.8.0.8 by Anite is a laptop-based drive test tool for wireless network testing which supports over 300 terminals and scanning receivers from various vendors and all major network technologies, including latest technologies, such as 3 carrier aggregation, LTE Cat 11 devices, VoLTE/ ViLTE, VoWiFi/ViWiFi, and eMBMS testing. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
NEMO WindCatcher 3.5.5.9 by Anite is a vendor-neutral, multi-data, multi-wireless access technology solution that provides the most comprehensive solution available in the market. It supports a wide range of data inputs and all major data collection tools on the market, and it is optimized for heterogeneous test environments and processes. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
NUMROTOplus 3.8 is a comprehensive software package for producing and resharpening a whole range of tools. Tested with the Hardlock key emulator with custom license.
DigiSILENT PowerFactory is a power systems analysis suite of tools. Tested with the WIBU CodeMeter dongle emulator.
ProCalc is a lease analysis software. Tested with the Dinkey hardware key emulator.
RCDC V5 is leading Design – Detailing – Drawing – Documentation software in India. It is a unique software that integrates with leading structural engineering packages. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
SEE Electrical Expert V7 and V8 by IGE+XAO is a powerful Electrical CAD package. Tested with the Sentinel HL (formerly HASP SRM) key emulator.
SCIA Engineer 2016 is a BIM-compatible structural analysis and design package. Tested with the custom license.
Sofistik is a heavy engineering CAD/FEA. Tested with the WIBU CodeMeter stick emulator.
Visual dBsee is the best tool to quickly create business-oriented applications based on the Xbase++ compiler of Alaska Software. Tested with the Eutron Smartkey 3 key emulator.